Thesis 2.4 JTD 20v - błędy skrzyni i niepokojący dźwięk
: 18 lut 2014, 15:16
Witam,
Kupiłam w styczniu Lancie Thesis 2.4 jtd 20v emblema 2003r i niestety już mi się wyświetla błąd skrzyni biegów COMFORTRONIC.
Skrzynia weszła w tryp awaryjny. Na drugi dzień nie było juz trybu awaryjnego, ale skrzynia wydaje dzwięk jakby jechała na biegu wstecznym.
Dodam, że wszystkie biegi działąją prawidłowo. Z D na N i odwrotnie z D na P i odwrotnie.
(tylko raz na światłach walneło z D na N ale to było na miesiąc przed tym błędem. Potem się już to nie powtarzało)
Czy możecie mi polecić kogoś kto zna się na skrzyniach tego typu?
Najlepiej w mazowieckim, moge jechać też dalej ale to juz chyba lawetą...
Zrzut z FiatECUScan 3.5
LANCIA THESIS 2.4 JTD 20V/ AISIN YLII 5 AUTOMATIC GEARBOX
- Temp. oleju skrzyni biegow - 46st. C
- 4 Błędy P1723, P1724, U1706, U1601
P1723 - Dane z CAN z układu hamulcowego (NFR) / Invalid signal / Stored
* No help available; The reason for this fault is that ECU has received invalid signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was not activated for this fault.
P1724 - Dane CAN z układu hamulcowego (NFR) / Invalid signal / Stored
* No help available; The reason for this fault is that ECU has received invalid signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was not activated for this fault.
U1706 - Linia CAN - połącz. z układem hamulcowym (NFR) / No signal / Stored/ Light ON
* No help available; The reason for this fault is that ECU did not receive signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was activated for this fault.
U1601 - Linia CAN / Invalid signal / Stored / Light ON
* No help available; The reason for this fault is that ECU has received invalid signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was activated for this fault.
Kupiłam w styczniu Lancie Thesis 2.4 jtd 20v emblema 2003r i niestety już mi się wyświetla błąd skrzyni biegów COMFORTRONIC.
Skrzynia weszła w tryp awaryjny. Na drugi dzień nie było juz trybu awaryjnego, ale skrzynia wydaje dzwięk jakby jechała na biegu wstecznym.
Dodam, że wszystkie biegi działąją prawidłowo. Z D na N i odwrotnie z D na P i odwrotnie.
(tylko raz na światłach walneło z D na N ale to było na miesiąc przed tym błędem. Potem się już to nie powtarzało)
Czy możecie mi polecić kogoś kto zna się na skrzyniach tego typu?
Najlepiej w mazowieckim, moge jechać też dalej ale to juz chyba lawetą...
Zrzut z FiatECUScan 3.5
LANCIA THESIS 2.4 JTD 20V/ AISIN YLII 5 AUTOMATIC GEARBOX
- Temp. oleju skrzyni biegow - 46st. C
- 4 Błędy P1723, P1724, U1706, U1601
P1723 - Dane z CAN z układu hamulcowego (NFR) / Invalid signal / Stored
* No help available; The reason for this fault is that ECU has received invalid signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was not activated for this fault.
P1724 - Dane CAN z układu hamulcowego (NFR) / Invalid signal / Stored
* No help available; The reason for this fault is that ECU has received invalid signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was not activated for this fault.
U1706 - Linia CAN - połącz. z układem hamulcowym (NFR) / No signal / Stored/ Light ON
* No help available; The reason for this fault is that ECU did not receive signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was activated for this fault.
U1601 - Linia CAN / Invalid signal / Stored / Light ON
* No help available; The reason for this fault is that ECU has received invalid signal from the sensor. The fault is not detected now, but it is stored in memory. Clear fault codes, and observe for future appearance of the same fault. Dashboard warning light was activated for this fault.